CAUTION
When entering the IP address, the address must be specified in CIDR notation. For
example, if the IP address is 10.10.10.10 with a netmask of 255.255.255.0, the IP
address must be specified as 10.10.10.10/24. Failure to do this will result in an
incorrect subnet mask being assigned.
7. Select OK, and then press Enter.
8. Select Quit, and then press Enter.
9. Restart the network by entering the following command on the command prompt:
Exabeam Appliance Network Conguration
Exabeam Appliance Setup Guide - Version SMP 2019
Published Mar 15, 2021 17
To Next Page
Loading...