DURING USE
• Never exceed the protection limit values indicated in
specifications for each range
of
measurement
• When the meter is linked to measurement circuit, do not
touch unused
terminals.
•
Never use the meter to measure voltages that might
exceed
600V
above
earth
ground
in
category
II
installations.
• When the
value
sclae
to be
measured
is
unkonwn
beforehand, set the range selector
at
the highest position.
• Before rotating the
range
selector
to change
functions
,
disconnect test
leads from the circuit under test.
• When
carrying
out
measurements
on TV
or
switching
p·
lwer
circuits always remember that there may be high
amplitude voltages
pulses
at test points. which can
damage the meter.
• Always
is
careful when working
w1th
voltages above 60V
de
or
30V
ac
rms . Keep fingers behind the probe barriers
while measuring.
• Before attempting to insert transistors for testing. always
be sure tl\at test leads have been disconnected from any
measurement circuits.
• Components should not be connected to the hFE socket
when making
voltage measurements with test leads.
•
Never perform resistance measurements on live circuits.
GENERAL DESCRIPTION
The
meter is a handheld 31/2 digital multimeter for measuring
DC
and
AC
voltage,
DC
current, Resistance, Diode and
Transistor with battery operated.
To Next Page
Loading...