What to do if Excelltel PBX running light malfunction?
If the running light on your Excelltel PBX is malfunctioning, check the power socket and the power supply to ensure they are working correctly.
What to do if Excelltel PBX has no sound from extension?
If there is no sound from an extension on your Excelltel PBX, reconnect the wiring or try to resolve the telephone’s failure. This might be due to disconnected wiring or a malfunction of the telephone itself.
What to do if Excelltel PBX has dial-out malfunction?
If your Excelltel PBX experiences a dial-out malfunction, connect to the exterior line or check whether the line is connected well. The issue may be caused by a disconnected or poorly connected exterior line.
What to do if Excelltel PBX has no incoming telephone display?
If your Excelltel PBX has no incoming telephone display, write application to telecommunication office, or rescind the No-disturbing and set incoming telephone display. This could be due to a devoid function of incoming telephone display, or a wrong setting of No-disturbing and its status.
What to do if Excelltel PBX has cacophony?
If you are experiencing cacophony with your Excelltel PBX, screw down the joint to fix bad connection, or leave telephone from the disturbing source because the distributing of line is not reasonable.
Why Intercom can’t be made on Excelltel PBX?
Intercom calls on your Excelltel PBX might fail because an extension hangs up improperly or the extension number is wrong.
What to do if Excelltel PBX bad tone?
If your Excelltel PBX has a bad tone, use the standard telephones. The issue may be due to mix using of non-standard telephones.
What to do if Excelltel PBX limited calling time?
If your Excelltel PBX has limited calling time, rescind the limit. This issue occurs because time is limited.
General| Model | MK-208 |
|---|---|
| Category | PBX |
| Capacity | 2 CO lines, 8 extensions |
| Power Supply | AC 220V ±10%, 50Hz |
| Environment Temperature | 0°C to 40°C |
| Ringing Voltage | AC 75V ±10% |
To Next Page
