28
Chap 4 Operating Instruction
4.1 Day/Night Mode Setting
4.1.1 Manual Setting
In manual mode, you can input the following command:
Format: # 2 0 Switch the system to day mode.
# 2 1 Switch the system to night mode.
1、The default mode is day mode.
2、The command can be inputted only by Programming Extensions
( Ext. 601, 602, 603, 604) , not in programming mode.
3、If the Ext. is in direct-dialing-out mode, you need to dial *#20 or *#
21 .
4.1.2 Automatic Mode Setting
when the called extension is no answer, the C.O. line will be cut off;
Format: # 2 2 Switch the day/night mode to auto mode (Same as
040# in programming mode).
# 2 3 Switch the day/night mode to manual mode(Same
as 041# in programming mode).
The command can be inputted only in Programming Extensions, not
in programming mode。
NOTE: There are two ways to switch Day/Night mode, Manual mode and
Auto mode.
In Manual mode, you are needed to switch Day/Night mode through
setting manually, that means every day you must set manually if you want
switch Day/Night mode. The system will be in Day mode always (or Night
mode) if you don’t set manually.
In Auto mode, the system will switch the day/night mode automatically
according the start and end time you have set in 3.4.1.
In Auto mode, the system also will switch the day/night mode
automatically according the Weekend mode you have set in in 3.4.4
4.2 Outward Call
This system provides more then five dialing modes to meet the
different need of customers.
4.2.1 Outward Dialing 9 First (or Dialing Directly)
Format:Pick up the handset and dial 9 first after hearing the internal
dialing tone, then dial the desired number after hearing the C.O. line
dialing tone.
Description:When the Ext is in Indirect-Dialing-Out mode, you’ll hear the
internal dialing tone after pick up the handset, dial 9 then you enter the
To Next Page
Loading...
