Excelltel MK-208 - Reporting of PBX System Version; Reporting of PBX System Status; Priority Access and Monitoring; Setting Dont Disturb; Clear

40
Description: After input the command and hang down, telephone will
ring, and the time will be displayed in your caller identify telephone.
Format: # 66
Description: After input the command and hang down, telephone will
ring, and the date will be displayed in your caller identify telephone.
4.13.3 Reporting of PBX System Version
Format: # 64
Description: After input the command and hang down, telephone will
ring, and the system version will be displayed in your caller identify
telephone.
4.13.4 Reporting of PBX System Status.
Format: # 6 5
Description: display operation refer to above instruction.
After make this setting ：
on Ext.601, will display the system test status (only for factory test
purpose).
Ext.602 display 16 bytes digits, sequence is day starting time (four bytes,
hour/minute)—lunch starting time – lunch ending time – night starting time
4.14 Priority Access and Monitoring
Format: # 7 M
Explanation: M: the C.O. line port number. M = 1 - 3
Description: Establish direct connection with C.O. line regardless whether
or not this line is occupied. This feature ensures the director or owner of a
company monitor the C.O. line communication.
Example: Priority access to C.O. line 3.then you can pick up Ext.601 input
#73 to access the No.3 Co.line .
Format: # 7 7abcd Establish direct connection with desired Ext. while it
is used
Explanation: M: C.O. line port number <abcd> is desired Ext number.
Description:. This feature ensures the director or owner of a company
monitor the C.O. line or No.N Ext. number conversation.
Example: Priority access to C.O. line 3 then pick up Ext.601 input #73
1. Only Ext.601 has priority access
2. If the Ext is at Direct-Dialing-Out mode, you should input: * # 7 M.
3. The monitor is responsible for the legal issues resulting from the
operation.
4.15 Setting Don’t Disturb / Clear
4.15.1 Setting Don’t Disturb
Format: # 83