Need help?Do you have a question about the ExcelPool Products Excelpool Salt System and is the answer not in the manual?
General| Brand | ExcelPool Products |
|---|---|
| Model | Excelpool Salt System |
| Category | Lighting Equipment |
| Language | English |
Covers warnings about shock, grounding, bonding, and the need for licensed electricians for wiring.
Specific notes for electricians regarding pool bonding, grounding, and NEC code references.
Emphasis on adhering to local codes, regulations, and safety precautions during installation.
Lists the recommended levels for salt, chlorine, pH, alkalinity, and hardness.
Step-by-step instructions for cleaning scale and debris from the cell using flushing and scraping.
Procedure for acid washing the cell in cases of severe scale buildup.
Importance of balancing pool water chemistry before activating the Excelpool System.
Adherence to local codes, NEC, proper grounding, and bonding for safe operation.
Connecting the system's input power to the LOAD SIDE of the filter pump timer.
Specific wiring requirements for Canadian models, including GFCI protection.
Illustrative diagrams for 120 VAC and 240 VAC wiring configurations.
Guidance on understanding the information displayed by the diagnostic button.
General steps for diagnosing and resolving common problems with the system.
Resolving issues related to the 'No Flow' and 'Check Salt' LED indicators.
Resolving issues related to the 'High Salt' and 'Inspect Cell' LED indicators.
Comprehensive list of factors that can lead to insufficient chlorine production.
To Next Page