Exerpeutic 1111 - Computer

Tool:
Multi Hex Tool with
Phillips Screwdriver
6. Seat and Back Cushions Installation
Remove eight M6x15 Bolts (21) and eight Ø6 Washers (58) from the back of the
Seat and Back Cushions (7, 8). Remove bolts with the Multi Hex Tool with Phillips
Screwdriver provided. Then attach the Seat and Back Cushions (7, 8) onto the
Back and Seat Support Bracket (1) with eight M6x15 Bolts (21) and eight Ø6
Washers (58) that were removed. Tighten bolts with the Multi Hex Tool with
Phillips Screwdriver provided.
14
COMPUTER