(3)If the count down action to 0:00 is not completed and there is no pulse signal, the
count down action has to be done and shown F6.
(4)If you press the RECOVERY button prior to count down to 0:00, it will be end and
return to the main menu.
Note:
1. Stop training for 4 minutes, the computer will enter to Sleep mode.
You may press any button to have the computer restart working, the original value will
retain.
(If re-install batteries, the original value will remove.)
2. If the computer displays abnormally, please re-install batteries and try again.
3. Battery Spec: 1.5V “AAA” (2PCS).
To Next Page
Loading...
