Exerpeutic 475SL - Installing the Head Cushion

21
ASSEMBLY
Step 12
Installing the Head Cushion:
12A. Attach the Head Cushion (67) on to the Bed Frame (2) with two Hex Bolts (33) and two Flat
Washers (32). Tighten the hardware with the 10, 13,17mm Wrench provided.
NOTE: There are 2 installation options for the head rest. Choose the position that fits you best.
(33) Hex Bolt
2PCS
(32) Flat Washer
2PCS
Hardware:
10, 13, 17mm Wrench 1PC
Tools:
Installation 1 (Lower)
Installation 2 (Higher)
Hardware
Hardware
67
2
2
67