Exerpeutic Elliptical - Foot Bar Cover Installation

ASSEMBLY
12. Assemble Foot Bar Covers A/B.
A. Place the Foot Bar Covers-A/B (75A, 75B) around the Left/Right Foot Bars (9L, 9R).
Make sure the side with holes on the Foot Bar Covers-A/B (75A, 75B) is facing the
Left/Right Foot Bars (9L, 9R). Tighten them with two Round Head Self Tapping
Screws (59) by using the Multi Hex Tool with Phillips Screwdriver until firm and
secure.
Hardware:
21
(#59) Round Head Self
Tapping Screw
4 PCS
Tool:
Multi Hex Tool with Phillips
Screwdriver