Exerpeutic Traction Table - Table Storage Instructions

15
HOW TO USE
To put Traction Table into storage mode:
1. Pull Pop Pin (13) out and hold while simultaneously pushing the Heel Holder Boom
(3) into the Main Frame (1).
2. Depress Snap Button (36) on the Adjustable Heel Holder (4) and pull it out of the
Heel Holder Boom (3).
3.Take the Adjustable Heel Holder (4) and insert it into the Adjustable Boom (2)
underneath the top side of the Backrest (10) with the Transport Handle (7) pointing
upward. Make sure the Snap button (36) locks into place.
4. Pull the handle out from the Crank Wheel (17) and fold it
away.
5. You can now store the table underneath a high bed or propped in a closet
STORAGE
4
36
2
4
3
6
1
1
3
19