Exide powerware plus - Page 19

   
Powerware
®
Plus 12 Operator's Manual (164200090 Rev E)  ! %#! !"' 13
 %   %
Use the Set Time & Date option to set the time, date, and format of the values. Use
the right and left arrow buttons to change the format (for example, MM/DD/YY to
DD/MM/YY). Use the up and down arrow buttons to change the numeric values.
 ! %#$% 
Use the Contrast Adjust option to change the contrast on the display. This option may
not be available for some Plus 12 models. Use the up and down arrow buttons to
adjust the contrast. Press the Select button to save the setting.
 !# !&
Use the Horn Volume option to set the alarm horn volume. Two volume settings are
available for the UPS alarm: loud and soft. Use the left or right arrow button to view
the setting.
 # # &&
Use the Clear Alarm Queue option to empty the list of alarms in the alarm queue.
Press the Select button to clear the alarm queue.
 % $# 
Use the Set User PWD option to modify the user password for the System Setup Menu.
When entering this option,  appears on the display. Use the left and right
arrow buttons to move the cursor position in the password field. Use the up and down
arrow buttons to scroll through the character values. To save the password, you must
press the Select button.
 %%#' 
Use the Battery Cfg option to set your battery configuration or set up the system
for custom batteries. See page 51 to use this option for configuring remote batteries.
The following configurations are available for the Battery Cfg option:
 No Battery
 Custom Battery
 1EBC2
 2 EBC2s
 3 EBC2s
 4 EBC2s
 1EBC1&1EBC2
 2EBC1&1EBC2
 1EBC1&2EBC2
 1EBC1
 2 EBC1s
 3 EBC1s
 1 EBC18
 2 EBC18s
 3 EBC18s
 4 EBC18s
Use the up and down arrow buttons to change the value. To save the value, press the
Select button.