8 Installation
Powerware
®
Plus 12 Operator's Manual (164200090 Rev E) 51
. Press the down arrow button until appears. Press the
Select button.
. Using the up and down arrow buttons, scroll to . Press the
Select button.
.A menu appears that allows you to select the lowĆbattery
shutdown level.
Use the left and right arrow buttons to scroll through the different options. Press
Select to choose the desired level. An asterisk appears to the left of the
newly selected option.
If the Custom DCUV selection does not appear after selecting Custom
Battery, verify that the UPS is off or on bypass.
. Press the Menu button four times to exit System Setup.
To Next Page
Loading...