Chapter 1
– General Service Information
Safety
Safety Precautions
Service Rules
Engine Model / Serial Number Location
Torque Values
Engine Specifications
General Torque Specifications
Safety
Safety Information
This symbol means WARNING or PERSONAL SAFETY INSTRUCTION – read the instruction because it has to do with
your safety. Failure to comply with the instruction may result in personal injury or even death.
This manual is intended as a service and repair manual only. The safety instructions provided herein are for
troubleshooting, service, and repair of the Toro engine. The Toro operator’s manual contains safety information and
operating tips for safe operating practices.
Avoid Unexpected Engine Start - Turn off engine and disconnect the spark plug before servicing engine.
Avoid Lacerations and Amputations - Stay clear of all moving parts while the engine is running.
Avoid Burns - Do not touch the engine, muffler, or other components which may increase in temperature during
operation, while the unit is running or shortly after it has been running.
Avoid Fires and Explosions - Avoid spilling fuel and never smoke while working with any type of fuel or lubricant. Wipe
up any spilled fuel or oil immediately. Never remove the fuel cap or add fuel when the engine is running. Always use
approved, labeled containers for storing or transporting fuel and lubricants.
Avoid Asphyxiation - Never operate an engine in a confined area without proper ventilation.
Avoid Injury From Batteries - Battery acid is poisonous and can cause burns. Avoid contact with skin, eyes, and
clothing. Battery gases can explode. Keep cigarettes, sparks, and flames away from the battery.
Avoid Injury Due To Inferior Parts - Use only original equipment parts to ensure that important safety criteria are met.
Avoid Injury To Bystanders - Always clear the area of bystanders before starting or testing power equipment.
Avoid Injury Due To Projectiles - Always clear the area of sticks, rocks, or any other debris that could be picked up and
thrown by the power equipment.
Avoid Modifications - Never alter or modify any part unless it is a factory approved procedure.
Chapter 1 – General Service Information
Chapter 2 - Specifications
Chapter 3 - Engine Service and Maintenance
Chapter 4 – Engine Disassembly and Service
To Next Page
Loading...
General