Exmark LAZER Z ADVANTAGE SERIES - User Manual

52 pages

Other manuals for Exmark LAZER Z ADVANTAGE SERIES

Parts Manual32 pages

Questions and Answers

L
lewisstephenSep 14, 2025
Why is my Exmark LAZER Z ADVANTAGE Lawn Mower cutting unevenly?
- U
  umasonSep 14, 2025
  If you notice an uneven cutting height with your Exmark Lawn Mower, start by sharpening the blades. If the cutting blades are bent, replace them. Make sure the mower deck is level from side to side and front to rear. Clean the underside of the mower deck, and ensure the tire pressure in the drive tires is correct. If the blade spindle is bent or the tips of adjacent blades are at an uneven cutting height, contact an Authorized Service Dealer.
C
Cynthia RodriguezNov 19, 2025
Why won't my Exmark LAZER Z ADVANTAGE Lawn Mower engine start or keep running?
- C
  Charles MeyerNov 19, 2025
  If your Exmark Lawn Mower engine is hard to start, won't start, or keeps stalling, there are several things to check. Begin by ensuring the fuel tank isn't empty and the fuel shutoff valve is open. Check the oil level in the crankcase and add oil if it's low. Make sure the throttle and choke are correctly positioned. Replace the fuel filter if it's dirty, and inspect the air cleaner, cleaning or replacing the element if needed. Also, ensure the seat switch is properly adjusted and all electrical connections are secure and free of corrosion. Check the spark plug wire connection, and clean, adjust, or replace the spark plug if it's faulty. If these steps don't solve the problem, there might be dirt, water, or stale fuel in the fuel system, or a defective relay or switch, and you should conta...