To Next PageTo Next Page
Need help?Do you have a question about the Exmark Phazer and is the answer not in the manual?
General| Engine | Kawasaki |
|---|---|
| Horsepower | 24 hp |
| Cutting Width | 52 inches |
| Cutting Height | 1.5 - 5 inches |
| Transmission | Hydrostatic |
| Deck Material | Steel |
Explains safety symbols, operator training, and pre-operation checks.
Details hazards from noise, footwear, and area inspection.
Explains the flammability and explosive nature of gasoline.
Addresses static electricity, carbon monoxide, and fuel vapor hazards.
Covers child safety and fuel vapor risks in enclosed spaces.
Details risks of burns from hot components and entanglement with rotating parts.
Outlines rules for safe operation, backing up, and transporting.
Provides critical safety guidelines for mowing on inclines and slopes.
Covers safe towing, maintenance, and storage procedures.
Discusses hydraulic fluid hazards and setup for commercial users.
Details the importance and maintenance of safety signs on the equipment.
Lists model numbers, engine details, and fuel system specifications.
Details electrical components and describes operator control functions.
Covers seat features, hydrostatic drive system, and tire specifications.
Details cutting deck specifications and overall machine dimensions.
Lists critical torque specifications for various fasteners on the machine.
Explains the function and operation of steering and motion control levers.
Details the operation of PTO, choke, throttle, brake, ignition, and hour meter.
Explains how to operate the fuel shut-off and drive wheel release levers.
Outlines steps before starting and how to start the engine.
Guides on mowing, engaging/disengaging PTO, and shutting down the engine.
Provides instructions for safely transporting and loading the mower.
Warns about accidental engine starting during maintenance.
Details daily checks for engine oil level and cleaning the cooling system.
Covers battery charging, under-deck cleaning, and tire pressure checks.
Details daily blade inspection and testing of safety interlock systems.
Covers daily checks for loose hardware and air cleaner service.
Guides on changing engine oil and checking hydraulic oil levels.
Covers checking belts, changing filters, and lubricating fittings/hubs.
Details spark plug checks, fuel filter replacement, and brake pivot lubrication.
Explains how to adjust cutting height and level the mower deck.
Covers adjusting throttle/motion levers and deck drive belt tension.
Advises on proper disposal of used oil and batteries according to regulations.
Provides checks for tire pressure, linkage, deck, and blade condition.
Lists common causes for engine starting failures and troubleshooting steps.
Shows the wiring schematic for the ignition switch and associated components.
Outlines warranty terms, covered products, and exclusions from coverage.
Provides instructions for seeking service and details owner's duties.
Explains California's warranty for evaporative emission control systems.
Details warranty requirements, coverage, and owner's maintenance duties.
