109-3910 Rev. B
Page 1 of 4
Loose Parts
Note: Use the chart below to verify that all parts have been shipped.
109-3354 Dealer Literature Pack
Part # Description Qty Use
103-1309 Warranty Registration Form 1 Fill out and return to Exmark
103-2106
1-603511
Key, Exmark Ignition
Key, Standard Ignition
1
1
Unit ignition
3274-94
1-373034
104-8301
Screw, Button Head 3/8-16 x 1
Washer
Nut, Nyloc 3/8-16 Flg
2
2
2
Installing Roller Bracket Assembly
109-3131 Literature Pack
Part # Description Qty Use
106-7022 Tube, Oil Drain 1 Draining engine oil
109-4354
109-4355
Manual, Operator’s
Manual, Parts
1
1
Read and view before operating machine
106-8294 Manual, Engine Operator’s 1 For Units with Kawasaki Liquid Cooled Engines
Checking Tire Pressure
1. Check the tire pressure in the drive tires. Proper
inflation for drive tires is 13 psi (90 kPa).
2. Adjust if necessary.
Fasten Seat
1. Remove the nut, washer and bolt from the lanyard.
2. Tilt seat downward and align lanyard to the hole in
the side of the seat (See Figure 1).
3. Install washer, bolt and nut.
FIGURE 1
4. Rotate seat retention bracket as shown in Figure 2
and tighten screw.
FIGURE 2
PHAZER™
SETUP INSTRUCTIONS
For Serial Nos. 600
000 and Hi
he
To Next Page
Need help?
General
