Exmark Radius E Series - Changing the Engine Oil

Maintenance
g335568
Figure49
5.Ifthelevelislow,wipeofftheareaaroundtheoil
llcap,removecap/dipstickandaddoiltothe
“FULL”markonthedipstick.Exmark4-Cycle
PremiumEngineOilisrecommended;referto
thefollowinginformationforanappropriateAPI
ratingandviscosity.Alwayscheckthelevelwith
thedipstickbeforeaddingmoreoil.DoNot
overll.
•CrankcaseCapacity:2.4L(2.5qt)
•RecommendedOilType:Exmark4-Cycle
PremiumEngineOil
–APIserviceSF,SG,SH,SJ,orSL
g029683
Figure50
Viscositytable
Note:Topreventextensiveenginewearor
damage,alwaysmaintaintheproperoillevelinthe
crankcase.Neveroperatetheenginewiththeoil
levelbelowthe“ADD”markoroverthe“FULL”
markonthedipstick.
ChangingtheEngineOil
ServiceInterval:Aftertherst5hours
Every100hours(change
itmoreoftenundera
heavyloadorinhigh
temperatures)(Exmark
Engine).
1.Parkthemachinesothatthedrainsideisslightly
lowerthantheoppositesidetoensuretheoil
drainscompletely.
2.Starttheengineandletitrununtilwarm.This
warmstheoilsoitdrainsbetter.
3.Disengagethebladecontrolswitchandensure
theparkingbrakeisengaged.
4.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
51