User’s Manual
http://www.exoatletasia.com
ExoAtlet
Ⓡ
II 40 / 84 Ver 1.0 (2019.03.29.)
6.3. Emergency Stop Function
In case of malfunction or other unexpected situation it is possible to immediately
stop exoskeleton. For that purpose, use red switch on the right handle of
exoskeleton. After pressing exoskeleton will immediately stop its motion and freeze in
current position until the switch will be released and then “OK” button will be
pressed in a pop-up screen on Tablet PC. After that exoskeleton state will be
restarted within several second and it will be possible to operate exoskeleton again.
In most cases you will have to reset pose before proceeding.
To Next Page
Loading...