Battery Replacement
When the 9V battery weakens, the indicator appears on the LCD. Follow these steps to
replace the battery:
1. Turn the meter OFF.
2. Remove the probe and the RS-232 cable from the meter.
3. Remove the protective rubber jacket that encases the meter by stretching it over the bottom of
the meter.
4. Open the battery compartment (located on the lower back of the meter) with a flat head
screwdriver or coin.
5. Replace the 9V battery, replace the compartment cover, and affix the rubber jacket.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection
sites, the retail store where the batteries were purchased, or wherever batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical and
electronic equipment.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
