Need help?Do you have a question about the Extech Instruments EX530 and is the answer not in the manual?
General| Frequency | 10Hz to 10MHz |
|---|---|
| Continuity | Yes |
| Diode Test | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Duty Cycle | 0.1 to 99.9% |
| Waterproof | IP67 |
| Power Supply | 9V battery |
| Type | Digital |
| Display | LCD |
| DC Voltage | 1000V |
| DC Current | 10A |
| AC Current | 10A |
| Resistance | 40MΩ |
| Temperature | -40 to 1000°C |
Explains safety symbols and overvoltage installation categories.
Lists critical safety rules and input protection limits for meter operation.
Step-by-step guide for measuring DC voltages and millivolts.
Guide for measuring AC voltage, frequency, and duty cycle.
Instructions for measuring DC and AC current, including different ranges.
How to perform resistance measurements and continuity checks.
To Next Page