Need help?Do you have a question about the Extech Instruments EX520 and is the answer not in the manual?
General| DC Voltage Range | 0.1mV to 1000V |
|---|---|
| Resistance Range | 0.1Ω to 40MΩ |
| Diode Test | Yes |
| Continuity | Yes |
| Battery Type | 9V |
| Data Hold | Yes |
| Auto Power Off | Yes |
| AC Current Range | 0 to 10A |
| DC Current Range | 0 to 10A |
| Capacitance Range | 0 to 100μF |
| Frequency Range | 0 to 10MHz |
| Duty Cycle | 0.1 to 99.9% |
| Category Rating | CAT III 600V |
Explains safety symbols like WARNING, CAUTION, and related indicators.
Details installation categories I through IV for overvoltage protection.
Lists maximum input values and protection limits for various measurement functions.
Explains the meaning of various symbols and indicators displayed on the multimeter's screen.
Step-by-step instructions for measuring DC and AC voltages with the multimeter.
Covers display backlight, hold, auto power off, and low battery indication.
Step-by-step guide for safely replacing the multimeter's fuses.
Lists specifications for resistance, capacitance, frequency, and temperature measurements.
Information on enclosure, drop test, impedance, bandwidth, safety standards, and approvals.
To Next Page