Need help?Do you have a question about the Extech Instruments EX505 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max Current Measurement | 10A |
| Resistance Measurement | Yes |
| Resistance Range | 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Temperature Measurement (Type K) | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Ranging | Yes |
| Relative Mode | Yes |
| Waterproof | No |
| Safety Category | CAT III 600V |
| Battery Type | 9V |
| Continuity | Yes |
| Diode Test | Yes |
| Duty Cycle | Yes |
| Max Voltage Measurement | 600V |
| Current Range (AC) | 600μA, 6000μA, 60mA, 600mA, 10A |
| Current Range (DC) | 600μA, 6000μA, 60mA, 600mA, 10A |
| Temperature Range | -40°C to 1000°C |
Brief overview of the multimeter's capabilities and design.
Explains safety symbols, warnings, cautions, and overvoltage categories for safe operation.
Identifies and describes the buttons, jacks, and function switch of the multimeter.
Explains the symbols and annunciators shown on the multimeter's screen.
Guides on how to measure AC and DC voltages safely and accurately.
Instructions for measuring AC and DC current, including frequency and duty cycle.
Procedures for measuring resistance, checking continuity, and testing diodes.
Procedures for capacitance, temperature, and frequency/duty cycle measurements.
Explains autoranging, manual ranging, and frequency sensitivity.
Describes relative mode, backlight, auto power off, and low battery indication.
Instructions for keeping the meter clean, dry, and in good condition.
Guides on installing batteries and replacing fuses safely.
Details accuracy and ranges for voltage and current measurements.
Details accuracy and ranges for resistance, capacitance, frequency, duty cycle, and temperature.
Describes enclosure, dimensions, weight, and safety certifications.
Lists approvals and standards met by the multimeter.
To Next Page