Need help?Do you have a question about the Extech Instruments IR400 and is the answer not in the manual?
General| Temperature Range | -4 to 600°F (-20 to 315°C) |
|---|---|
| Accuracy | ±3% of reading or 3.5°F/2°C whichever is greater |
| Resolution | 0.1 °F/°C |
| Response Time | 500 ms |
| Display | LCD |
| Power Supply | 9V battery |
| Dimensions | 6.5 x 3.5 x 1.5 in (165 x 90 x 38 mm) |
| Weight | 0.6 lb (272 g) |
| Spectral Response | 8 to 14 µm |
| Display Resolution | 0.1 °F/°C |
| Battery Type | 9V battery |
| Type | Infrared Thermometer |
| Emissivity | Adjustable from 0.10 to 1.00 |
Identifies key physical parts of the thermometer, including the laser pointer, sensor, trigger, and display.
Describes the various icons, readings, and status indicators shown on the LCD screen.
Step-by-step guide for taking non-contact temperature readings with the device.
Instructions on how to activate, deactivate, and use the laser pointer for target identification.
Details on how to utilize the feature to display the highest or lowest measured temperatures.
Explains how to switch between Celsius (°C) and Fahrenheit (°F) temperature units.
Instructions for turning the LCD backlight on and off for improved visibility.
How the meter signals when a measurement exceeds its specified temperature range.
To Next Page