6 MN24-en-US_V2.2 07/15
Maintenance
WARNING: To avoid electrical shock, disconnect the test leads from any
source of voltage before removing the rear cover.
WARNING: To avoid electrical shock, do not operate this meter until the rear
cover is in place and fastened securely.
This Multimeter is designed to provide years of dependable service if the following
care instructions are observed.
1. Keep the meter dry.
2. Use and store the meter in mild ambient conditions. Temperature
extremes can shorten the life of the electronic parts and distort or melt
plastic parts.
3. Handle the meter gently. Dropping it can damage the electronic parts or
the case.
4. Keep the meter clean. Wipe the case occasionally with a damp cloth. DO
NOT use chemicals, cleaning solvents or detergents.
5. Use only fresh batteries of the recommended size and type. Remove old
or weak batteries so they do not leak and damage the unit.
6. If the meter is to be stored for a long period of time, the batteries should
be removed to prevent damage to the unit.
To Next Page
Loading...
Need help?
General
