Need help?Do you have a question about the Extech Instruments MiniTec MN36 and is the answer not in the manual?
General| Measurement Types | AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Continuity, Diode Test |
|---|---|
| Frequency Range | 10Hz to 10MHz |
| Continuity | Yes |
| Diode Test | Yes |
| Safety Rating | CAT III 600V |
| Display | LCD |
| AC Current Range | 0 to 10A |
| DC Current Range | 0 to 10A |
Explains symbols indicating need to refer to manual for further info.
Lists critical safety rules for operating the multimeter safely to avoid injury or damage.
Instructions for measuring AC and DC voltage using the multimeter, including probe placement and switch settings.
Steps for measuring DC current up to 10A, emphasizing safety precautions and correct jack usage.
Guide on how to measure resistance, including probe placement and selecting appropriate range.
Instructions for measuring temperature using a thermocouple probe, with safety warnings.
Procedure for checking continuity, noting the buzzer sound for low resistance values.
Steps for testing diodes, including expected forward and reverse voltage readings.
How to perform a battery test and interpret the results for 1.5V and 9V batteries.
Step-by-step instructions for replacing the multimeter's battery, including safety warnings.
Detailed procedure for replacing the fuse, specifying the correct fuse type and size.
Explains the meaning of various symbols used on the multimeter and in the manual for clarity.
To Next Page