Need help?Do you have a question about the Extech Instruments 380947 and is the answer not in the manual?
General| Model | 380947 |
|---|---|
| Brand | Extech Instruments |
| Display Type | LCD |
| Display Digits | 4000 |
| Max Voltage Measurement | 600V |
| DC Voltage Range | 400mV to 600V |
| AC Voltage Range | 4V to 600V |
| Resistance Range | 400Ω to 40MΩ |
| Frequency Range | 10Hz to 10MHz |
| Temperature Measurement | Yes |
| Diode Test | Yes |
| Continuity | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Safety Rating | CAT III 600V |
Graphical representation of electrical safety symbols and their meanings.
Overview of the meter's general technical characteristics and features.
Details on measurement ranges, resolution, accuracy, and overload protection.
Identifies and describes the main parts and operational buttons of the clamp meter.
Explains various icons displayed on the meter, including battery status, measurement types, and functions.
Details how to interpret the 40-segment bargraph as a graphical representation of the measurement.
Procedures for measuring both AC and DC current with the clamp meter.
How to perform frequency measurements using the clamp meter.
Details on using MIN/MAX, Data Hold, and Relative Zero modes.
Instructions for replacing the meter's batteries and cleaning the device.
To Next Page