To Next PageTo Next Page
Need help?Do you have a question about the Extech Instruments 380941 and is the answer not in the manual?
General| Model | 380941 |
|---|---|
| Category | Multimeter |
| Brand | Extech Instruments |
| Display Type | LCD |
| DC Voltage Range | 400mV to 1000V |
| DC Current Range | 400µA to 10A |
| AC Current Range | 400µA to 10A |
| Resistance Range | 400Ω to 40MΩ |
| Frequency Range | 10Hz to 10MHz |
| Temperature Measurement | Yes |
| Diode Test | Yes |
| Continuity | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Low Battery Indication | Yes |
| Battery | 9V |
| Duty Cycle Range | 0.1% to 99.9% |
| Power Source | Battery |
Details general specifications like display, functions, power, dimensions.
Outlines measurement ranges, resolutions, and accuracies for various functions.
Step-by-step guide for measuring AC current using the clamp meter.
Instructions for performing DC current measurements with the clamp meter.
Procedure for measuring AC voltage using the clamp meter.
How to measure DC voltage with the clamp meter, including lead placement.
Steps for measuring resistance and continuity, including safety precautions.
Guidance on how to measure frequency using the clamp meter.
Explanation of how to use the relative measurement function.
How to freeze a reading on the LCD display.
Instructions for using the minimum/maximum reading mode.
Steps for replacing the batteries in the meter.
Guidance on how to clean the meter's plastic case.
