Need help?Do you have a question about the Extech Instruments MN35 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Display Count | 2000 |
| Battery Type | 9V |
| Continuity Test | Yes |
| Diode Test | Yes |
| DC Current Range | 10A |
| Capacitance Range | 20nF |
| Frequency Range | 10MHz |
| AC Voltage Range | 200V to 600V |
Details international safety symbols, precautions, and input limits for safe operation.
Identifies and describes the key physical components of the multimeter shown in the diagram.
Guides for performing AC/DC voltage and DC current measurements using the multimeter.
Detailed procedures for resistance, temperature, continuity, diode, and battery measurements.
Provides guidance on keeping the meter dry, clean, and in good condition for longevity.
Steps for safely replacing the fuse in the multimeter.
Lists technical specifications including range, accuracy, input impedance, and operating conditions.
Explains common symbols used on the multimeter and in the manual.
To Next Page