Extech Instruments MN35

MN35-EU-EN V2.3 4/13
5
Maintenance
WARNING:Toavoidelectricshock,disconnectthetestleadsfromanysourceofvoltage
beforeremovingthebattery/fusecover.

WARNING:Toavoidelectricshock,donotoperateyourmeteruntilthebattery/fusecoverisin
placeandfastenedsecurely.
ThisMultimeterisdesignedtoprovideyearsofdependableservice,ifthefollowingcare
instructionsareperformed.
1. Keepthemeterdry.
2. Useandstorethemeterinmildambientconditions.Temperatureextremescanshortenthelife
oftheelectronicpartsanddistortormeltplasticparts.
3. Handlethemetergently.Droppingitcandamagetheelectronicpartsorthecase.
4. Keepthemeterclean.Wipethecaseoccasionallywithadampcloth.DONOTusechemicals,
cleaningsolventsordetergents.
5. Useonlyfreshbatteriesoftherecommendedsizeandtype.Removeoldorweakbatteriesso
theydonotleakanddamagetheunit.
6. Ifthemeteristobestoredforalongperiodoftime,thebatteriesshouldberemovedtoprevent
damagetotheunit.