9 MN24-en-US_V2.2 07/15
Diode Test Test current of 1mA maximum, open circuit voltage 2.8V DC typical
Continuity Check Audible signal will sound if the resistance is less than approx 30
Battery Test current 9V (6mA); 1.5V (100mA)
Input Impedance >1M
ACV Bandwidth 45Hz to 450Hz
DCA voltage drop 200mV
Display 3 ½ digit, 2000 count LCD, 0.5” digits
Over range indication “1” is displayed
Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative
polarity.
Measurement Rate 2 times per second, nominal
Low Battery Indication “BAT” is displayed if battery voltage drops below operating voltage
Battery one 9 volt (NEDA 1604) battery
Fuses mA, A ranges; 0.2A/250V fast blow
A range; 10A/250V fast blow
Operating Temperature 32
o
F to 122
o
F (0
o
C to 50
o
C)
Storage Temperature -4
o
F to 140
o
F (-20
o
C to 60
o
C)
Relative Humidity <70% operating, <80% storage
Operating Altitude 7000ft. (2000) meters maximum.
Weight 9.17 oz. (260g).
Size 4.78” x 2.38” x 1.57” (121.5mm x 60.6mm x 40mm)
Approvals UL, CE
Safety For indoor use and in accordance with Overvoltage Category II 600V,
Pollution Degree 2. Category II includes local level, appliance, portable
equipment, etc., with transient overvoltages less than Overvoltage
Category III.
UL Listed The UL mark does not indicate that this product has been evaluated for
the accuracy of its readings.
To Next Page
Loading...
Need help?
General
