TH10 V1.0 9/07
2
Introduction
Congratulations on your purchase of the Relative Humidity and Temperature Datalogger. This datalogger
measures and stores up to 32,000 temperature. The user can easily set up the logging rate, high/low alarm and
start-mode, and download the stored data by plugging the module into a PC's USB port and running the supplied
PC software. Temperature data can then be graphed, printed and exported to other applications. The data
logger is supplied with a long-life lithium battery, which can typically allow logging for one year. This meter is
shipped fully tested and calibrated and, with proper use, will provide years of reliable service
Features
Memory for 32,000 readings
Selectable data sampling rate: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr
Status Indication via Red/Yellow LED and Green LED
USB Interface for Set-up and Data Download
User-Programmable Alarm Thresholds for Temperature
Analysis software used to view graph
Long battery life
Description
1. Protective cover
2. USB connector to PC port
3. Start button
4. Temperature sensor
5. Alarm LED (red/yellow)
6. Record LED (green)
7. Mounting clip
To Next Page
Loading...
Need help?
General
