Extel WAVE 2 - Smartphone Application Setup

EXTEL - WAVE 2 - 720321
en - 6
5 - SMARTPHONE APPLICATION
Connecting a monitor to the WiFi network
1- Download the Extel Connect application onto your smartphone. From the Apple store or Play store
2- From the monitor, go to the WiFi menu then the pairing with your smartphone sub-menu
Note: If the icon does not appear on the third line, reset the WiFi by selecting the
Slave
+
Master
button. Select YES by
pressing the
Slave
+
Master
button once and confirm by pressing the
Slave
+
Master
button.
The monitor will restart. Wait 30 seconds and return to the menu, the
icon should appear.
The Extel Wave 2 videophone works with all types of 2.4GHz or 5GHz WiFi.
Before starting the pairing procedure, it is essential to connect your smartphone to the WiFi to which you wish to
connect the videophone.
D - INSTALLATION