Extra 200 - Page 59

EXT
RA - FLUGZEUGBAU GmbH
SERVICE MANUAL EXTRA 200
CHAPTER 05
PAGE 21
PAGE DATE: 1. July 1996
O O 4 Inspect tail-wheel spring and swivel arm mounting bolts for
security.
O O 5 Check for general condition and function. Pay attention to
the free movement of the rudder.
O O 6 Check the connector springs for light precompression.
O O 7 Check the wheelfork for free rotation and steering function,
damage, dents, cracks and corrosion.
O O 8 Inspect wheelfork for damage, dents, cracks and corrosion.
O O 9 Inspect the axle bolt and nut for fretting, wear, damage, and
stretch.
O O 10 Lubricate tail wheel steering.
Wing
O O 1 Check wing for dents, cracks, and delaminations.
O 2 Inspect wing spar main bolts for looseness and security.
O 3 Check the safety wire and the safety screw of the wing main
spar bolt.
O 4 Inspect wing spar main sleeves for looseness and bearing
load.
O 5 Inspect wing auxiliary spar attachment.
O 6 Inspect wing ventilation holes for obstruction.
O O 7 Check inside wing structure in the area of access panels.
Stabilizer
O O 1 Check stabilizer for dents, cracks; stone nicks and
delaminations.
O O 2 Inspect stabilizer spars main bolts for looseness and security.
O O 3 Inspect stabilizer auxiliary spars attachment.
O 4 Inspect stabilizer ventilation holes for obstruction.
Inspector:
Mechanic:
Date:
Serial No.:
Inspections
as specified
each 100 hours
SCHEDULED MAINTENANCE CHECKS
Maintenance Checks Schedule
each 50 hours