Please read the following paragraphs before beginning assembly of your aircraft!
THIS IS NOT A TOY! Serious injury, destruction of property, or even death may result from the misuse of this
product. Extreme Flight RC is providing you, the consumer with a very high quality model aircraft component
kit, from which you, the consumer, will assemble a flying model. It is beyond our control to monitor the finished
aircraft you produce. Extreme Flight RC will in no way accept or assume responsibility or liability for damages
resulting from the use of this user assembled product. This aircraft should be flown in accordance to the AMA
safety code(or the appropriate model code for your region). It is highly recommended that you join the Acade-
my of Model Aeronautics in order to be properly insured, and to operate your model at AMA sanctioned flying
fields only. If you are not willing to accept ALL liability for the use of this product, please return it to the place of
purchase immediately.
Extreme Flight RC guarantees this kit to be free of defects in materials and workmanship for a period of 30
DAYS from the date of purchase. All warranty claims must be accompanied by the original dated receipt. This
warranty is extended to the original purchaser of the aircraft kit only.
Extreme Flight RC in no way warranties its aircraft against flutter. We have put these aircraft through the most
grueling flight tests imaginable and have not experienced any control surface flutter. Proper servo selection
and linkage set-up is absolutely essential. Inadequate servos or improper linkage set up may result in flutter
and possibly the complete destruction of your aircraft. If you are not experienced in this type of linkage set-up
or have questions regarding servo choices, please contact us at info@extremeflightrc.com or 770-887-1794.
It is your responsibility to ensure the airworthiness of your model.
Special notes on the 67” Extra NG aircraft:
The 67” Extra NG is super-high-performance 3D and XA aerobatic machine. It is perfectly matched to the
T-Motor AM670 motor and AM116 ESC with T-motor 18x8 carbon or 17x10 composite prop. This is the con-
figuration we used in development testing.
Be sure to use a premium, very high quality servo, such as the EF/Theta 989 or Savox SV-1261MG.
Please read through this guide before beginning assembly to familiarize yourself with the tools and materials.
To Next Page
Loading...
