Extreme Networks AP-7522 - Page 20

20 AP-7522 Access Point
The LEDs provide a status display indicating error conditions, transmission, and network
activity for the 5 GHz 802.11ac (amber) radio and the 2.4 GHz 802.11n (green) radio.
Task 5 GHz Activity LED (Amber) 2.4 GHz Activity LED (Green)
Unconfigur
ed Radio
On On
Normal
Operation
• If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per
second
• If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per
second
Firmware
Update
On Off
Locate AP
Mode
LEDs blink in an alternating green,
red and amber pattern using an
irregular blink rate. This LED state
in no way resembles normal
operating conditions.
LEDs blink in an alternating green,
red and amber pattern using an
irregular blink rate. This LED state
in no way resembles normal
operating conditions