22 AP-7522 Access Point
If this is the first time the interface has been accessed, a screen displays prompting for
the Access Point’s country code.
6. Select the Country Code specific to this Access Point’s deployment location.
Selecting the correct country is central to legal operation. Each country has its own
regulatory restrictions concerning electromagnetic emissions and the maximum RF
signal strength that can be transmitted. Select Apply to implement the selected
Country Code. SKU's only support certain countries (for example: a US SKU only
includes US, Guam, Puerto Rico, American Samoa, US Virgin Islands and Mariana
Island).
The Access Point automatically displays a Dashboard where users can assess
network health and conduct a diagnostic review of Access Point performance.
NOTE At some point in the Access Point’s initial setup, the default
password should be changed to enhance the security of the
Access Point managed network. Refer to the Configuration
> Management screen to change the default password to a
more secure password.
To Next Page
Loading...
