•
Mode 1. Radios 1 and 2 are enabled when:
•
One or more antennas are configured in Group 1.
•
Mode 2. Radio 1 is a 2.4/5 sensor and Radio 2 forwards trac.
•
Radio 2 is enabled only if one or more antennas are configured in Group 1.
•
Radio 1 – sensor needs one or more antennas configured in Group 2.
•
Mode 3. Radios are configured Dual 5GHz mode.
•
Radio1 is enabled only if one or more antennas are configured in Group 2.
•
Radio 2 is enabled only if one or more antennas are configured in Group 1.
Figure 20: AP510e Antenna Professional Install
Related Links
Adding APs on page 107
NEW!
AP560h Professional Install Settings
The AP560h is an outdoor AP that has two types of selectable, internal antenna. You must select one of
the following antennas:
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 112
To Next Page
Loading...
