Managing Administrator Accounts
ExtremeCloud Appliance is shipped with a factory-set, default administrator account with full rights:
•
The user ID is admin.
•
The factory preset password for this account is abc123.
These values are case sensitive. During initial configuration of ExtremeCloud Appliance, the CLI
wizard prompts you to change the default Admin user ID and password.
To add administrator accounts:
1 Go to Administration > Accounts.
2 Click Add and configure the following parameters:
Username User name for the administrator account.
Password Password for the administrator account.
Confirm Password Re-enter password for the administrator account.
Admin Role Select the level of access privileges for the administrator account. Valid values are:
•
Full. Full administrative privileges.
•
Read-Only. Ability to log on and view administrative pages.
3 To edit account settings:
1 Select and existing account from the list.
2 Modify settings as necessary and click Save.
4 To delete an existing account:
1 Select and existing account from the list.
2 Click Delete.
Note
All administrator accounts except the default account can be deleted.
Managing RADIUS Servers for User Authentication
Configure a list of RADIUS servers to authenticate users of ExtremeCloud Appliance.
1 Go to Administration > Accounts > RADIUS.
2 Under Authentication Order, click Add to add a RADIUS server to the Authentication Order.
3 Under RADIUS Servers, click Add to add the properties of the RADIUS server.
4 Select the IP Address field to display a list of available RADIUS servers.
Select the RADIUS server row to add or delete a RADIUS server.
Related Links
RADIUS Settings on page 147
Advanced RADIUS Settings on page 147
Administration
ExtremeCloud Appliance User Guide for version 4.36.03 205
To Next Page
Loading...
