Positioning Profile Settings on page 85
Position Aware Services on page 16
Device List
View access points (APs), switches, and proxy controllers from Monitor > Devices. See the
ExtremeCloud Appliance Release Notes for a list of supported APs and switches.
Note
ExtremeCloud Appliance supports Extreme Defender Adapter SA201 for the Defender for IoT
solution. For more information on Extreme Defender for IoT, refer to documentation located
in the Extreme Networks documentation portal: https://extremenetworks.com/
documentation/defender-application.
Related Links
Understanding Access Point States on page 41
AP Adoption Rules on page 142
Adding APs on page 107
Adding or Editing a Configuration Profile on page 68
Advanced AP Radio Settings on page 75
Network Snapshot: AP Dashboard on page 44
Opening Live SSH Console to a Selected AP on page 49
Packet Capture on page 45
Switches on page 113
Controllers List on page 52
Access Points List
Go to Monitor > Devices > Access Points to see a list of APs in ExtremeCloud Appliance.
The model and licensing domain of the AP determines the site configuration type and site licensing
domain. The configuration Profile and RF Management for a device group are specific to the AP
platform.
The Country option on the site must support the AP licensing domain, and the site configuration type
must support the AP model.
Note
The following access points are supported in both a Centralized and Distributed site:
•
AP505i
•
AP510i/e
•
AP560i/h
•
A Centralized site supports the following access point models:
•
AP3917i/e/k
•
AP3916ic
Monitor
ExtremeCloud Appliance User Guide for version 4.36.03 40
To Next Page
Loading...
