Extreme Networks ExtremeCloud Appliance Series - Page 147

Advanced RADIUS Settings on page 147
RADIUS Settings
Configure the following parameters and click Save.
Table 59: RADIUS Server Settings
Field Description
RADIUS Server IP address IP address of the RADIUS server.
Response Window Determines the window of time, in seconds, that ExtremeCloud
Appliance will wait for a response from the RADIUS server.
Authentication Timeout Duration Determines a timeout value, in seconds, for the RADIUS server
connection.
Authentication Retry Count Determines the number of times ExtremeCloud Appliance will attempt
to authenticate an end user.
Authentication Client UDP Port UDP port number used for client authentication. User Datagram
Protocol (UDP) needs only one port for full-duplex, bidirectional
trac.
Proxy RADIUS Accounting Requests Indicates that the RADIUS server will also handle RADIUS accounting
requests.
Accounting Client UDP Port UDP port number used for client accounting. User Datagram Protocol
(UDP) needs only one port for full-duplex, bidirectional trac.
Shared Secret The password that is used to validate the connection between the
client and the RADIUS server.
Mask Determines if the Shared Secret value is displayed on the user
interface. Enable Mask to display dots in place of the Shared Secret
value. Clear the Mask check box to display the password characters.
Related Links
Managing RADIUS Servers on page 146
Advanced RADIUS Settings on page 147
RADIUS Configuration for Switches Per Site on page 66
Advanced RADIUS Settings
For information about advanced RADIUS configuration settings, see the following table:
Onboard
ExtremeCloud Appliance User Guide for version 4.36.03 147