Adding Walled Garden Rules
Take the following steps to configure Walled Garden rules:
1 Go to Configure > Networks and select a network.
2 Enable Captive Portal.
3 Click Walled Garden Rules.
4 Click drop-down to display settings for each OSI layer:
•
L2 (Mac Address) Rules
•
L3, L4 (IP and Port) Rules
•
L7 (Application) Rules
5 Configure the rule parameters.
Each application site requires specific rules to access their site domains. The following table lists the
rule configuration parameters needed for each application site.
Note
The domain information for each application site is subject to change. Refer to specific
application site documentation if necessary.
Table 54: FQDN Rules Required for Social Logins
Application Site Rule Parameters
Facebook
•
Allow FQDN to facebook.com, port HTTPS
•
Allow FQDN to fbcdn.net, port HTTPS
Google
•
Allow FQDN to accounts.google.com, port HTTPS
Microsoft
•
Allow FQDN to login.live.com, port HTTPS
•
Allow FQDN to gfx.ms, port HTTPS
•
Allow FQDN to akadns6.net, port HTTPS
Salesforce
•
Allow FQDN to login.salesforce.com
•
Allow FQDN to sfdcstatic.com
Yahoo
•
Allow FQDN to login.yahoo.com, port HTTPS
•
Allow FQDN to yimg.com, port HTTPS
Related Links
Walled Garden Rules on page 124
Configuring L2 Rules on page 130
Configuring L3, L4 Rules on page 131
Configuring L7 Application Rules on page 133
Advanced Network Settings
To configure advanced network settings:
1 Go to Configure > Networks > Add.
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 125
To Next Page
Loading...
