Extreme Networks ExtremeCloud Appliance Series - Page 179

Adding or Editing a Configuration Profile on page 68
Adding APs on page 107
Navigating ExtremeCloud Appliance Using Workflow on page 174
Workflow on page 173
Adding Components from Workflow
The Workflow pane lists all available components and indicates how many components you have
configured for each component type.
To add components directly from the Workflow pane:
•
Click the drop-down arrow under a component type and select the plus sign.
•
Configure the parameters to add the component to the appliance and click OK.
1 From the Workflow pane, click the arrow next to Access Points.
Figure 28: Workflow Pane APs
2 Select the plus sign.
Figure 29: Adding APs from Workflow Pane
The configuration page for the selected component displays, allowing for further configuration. The
parameters that you supply and the resulting configuration page depend on the component type. In
this example, The Add AP dialog displays.
Tools
ExtremeCloud Appliance User Guide for version 4.36.03 179