Extreme Networks ExtremeCloud Appliance Series - Page 208

Table 82: Container Application Configuration Template (continued)
Field Description
Logs Config Log file format. Valid values include:
•
json-file. Default value,which allows you to view the application
logs from the application Details icon in ExtremeCloud Appliance.
•
syslog. View application logs from the System log file.
•
gelf. Graylog Extended Log Format.
Restart Policy Indicates the application restart behavior when ExtremeCloud
Appliance is started. Valid values are:
•
Always. The application will always restart.
•
Unless Stopped. The application will restart unless it was manually
stopped prior to the ExtremeCloud Appliance start. The
application will keep its current state.
•
Failed. Will restart only after an application failure.
CPU Limit Used to manage CPU allocation when multiple applications are
installed. Max limits are dependent on the appliance platform
limitations.
Memory Limit (MB) Used to manage memory allocation when multiple applications are
installed. Max limits are dependent on the appliance platform
limitations. Default value is 50 percent of maximum limitation.
Volume Mapping Indicates folder name and path for volume storage. Volume storage
will not be deleted upon application upgrade.
Note: All data is deleted when the application is uninstalled.
Port Mapping Configure source and destination ports for the application. The
external port range must be 32768-65535, because this is the open
port filter range.
Environment Variables Configure environment variables.
Related Links
Installing Applications on page 206
Upgrading an Application
Note
Data in Volume storage will not be deleted upon application upgrade. However, all data is
deleted when the application is uninstalled.
To upgrade an application:
1 Go to Admin > Applications.
2
Click to stop the application.
3 Click OK to confirm that you want to stop the application.
4
Click to begin the application upgrade.
5 Upgrade from a local File or Docker hub Registry.
Administration
ExtremeCloud Appliance User Guide for version 4.36.03 208