Understanding Switch States
The following describes switch states on the Switches Device List.
Table 12: Switch State from the Device List
State Description
In-service:
•
Switch acknowledges the sent configuration
•
Switch sends statistics every 5 minutes.
In-Service Trouble:
•
Switch in process of connecting to ExtremeCloud Appliance
•
Configuration is pending acknowledgment from switch
•
Switch reset pending
•
Switch reboot pending
•
Switch upgrade pending
Unknown. Switch has not discovered the ExtremeCloud Appliance.
Critical:
•
Switch stops sending requests for 5 minutes or longer
•
Consistent with a lost of connectivity to ExtremeCloud Appliance
Network Snapshot: Switch Details
To view network details from the switch screen:
1 Go to Monitor > Devices > Switches.
2 Select a switch (not the check box).
The network details for the selected switch appear.
Table 13: Tabs on the Switch Details Screen
Tab Description
Dashboard Widgets display network details related to the selected switch.
Ports List of configured ports on the selected switch.
LAG Ports Link Aggregation Group (LAG) Ports organized as a list of master
ports and the LAG members that are associated with the master
port. All ports assigned to a LAG must have the same port function.
The configuration of the master port is shared with its LAG
members. When a port is added to a LAG, its previous unique
configuration is removed and the port inherits the group
configuration.
Note: A Link Aggregation Group whose function is to connect to an
AP is limited to two ports in the group.
Monitor
ExtremeCloud Appliance User Guide for version 4.36.03 50
To Next Page
Loading...
