To access the Clients screen:
Go to Clients and select a client from the list.
Information about the selected client appears.
Table 16: Client Information
Client MAC address and status Associated Access Point
Client IP Address Network SSID
IPv6 Address, if applicable Associated AP Radio
Last device group RSS Reading
Date and time last seen on the network Protocol
Manufacturer Tx Rate (Transmitted signal rate)
Role Rx Rate. (Received signal rate.)
Device Family
Device Type
Host Name
The Client Details displays a chart of client association with an AP.
Table 17: Tabs on the Client Screen
Tab Description
Dashboard Network charts provide throughput, volume, and speed information
for each client. Use this information to understand network trac
and load.
Sites Lists sites associated with the client.
Networks Lists the network services associated with the client. Select a
network to display network details. See Network Service Settings on
page 119 .
Access Points Lists access points associated with the client. Use the search facility
to find a specific AP.
Station Events Log of station events for the client. Use the search facility to locate a
specific event. Search on any column heading. To enable station
events, go to Admin > System > Logs and check Send Station
Events.
Related Links
Client Widgets on page 58
Station Events on page 57
Client Actions on page 54
Understanding Date and Time on page 20
Overview Dashboard on page 22
Floor Plans on page 16
System Logging Configuration on page 203
Monitor
ExtremeCloud Appliance User Guide for version 4.36.03 56
To Next Page
Loading...
