Table 24: Advanced Configuration Profile Settings (continued)
Field Description
Session Persistence
Note: Supported on APs in a Centralized site and on AP5xx in a
Distributed site.
Determines if session persistence is enabled. A persistent session
directs a client's requests to the same backend server for the duration
of a session or the time it takes to complete a task or transaction.
Enable this option to improve request response times. For more
information, see Session Persistence on page 75.
Mgmt VLAN ID Separating management trac from user data trac is a
recommended practice. The Management VLAN ID is 1 by default.
AP will accept wireless client even without active connection to
ExtremeCloud Appliance on WLANs where ExtremeCloud Appliance is
not required.
Tagged Check this option to tag the VLAN. Tagged VLAN packets include
header information that identifies which VLAN the packet is coming
from.
You can configure Tagged VLANs for all APs in a device group from
the device group Advanced Settings dialog. And you can override the
device group setting for one or more individual APs from the AP
Advance Settings > Override dialog.
MTU Maximum Transmission Unit in bytes. Determines the maximum size of
each packet in transmission.
Scan Mode
Note: Supported on AP5xx models only.
Determines which channels are scanned. Valid values are:
•
Default Scan. — Scans all supported channels. Optimized to scan
widest possible channel.
•
Channel Lock — Scans on single channel.
•
Custom Scan — Scan is based on a selected custom list. Define a
custom channel list including channel width.
•
Radio 1 channels are 2.4G (AP510i/e includes 5G channels).
•
Radio 2 channels are 5G.
Channels Select channels for a custom channel list used for Custom Scan Scan
Mode.
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 74
To Next Page
Loading...
