Extreme Networks Summit Summit24 - Page 5

Summit24e3 Switch Quick Reference Guide 5
config snmp syslocation <string> Configures the location of the switch. A maximum of 255
characters is allowed.
config snmp sysname <string> Configures the name of the switch. A maximum of 32 characters
is allowed. The default sysname is the model name of the device
(for example, Summit24e3). The sysname appears in the
switch prompt.
config sntp-client [primary | secondary] server
[<ipaddress> | <host_name>]
Configures an NTP server for the switch to obtain time
information. Queries are first sent to the primary server. If the
primary server does not respond within 1 second, or if it is not
synchronized, the switch queries the second server.
config sntp-client update-interval <seconds> Configures the interval between polling for time information from
SNTP servers. The default setting is 64 seconds.
config tacacs [primary | secondary] server
[<ipaddress> | <hostname>] {<udp_port>}
client-ip <ipaddress>
Configure the server information for a TACACS+ server. Specify
the following:
■ primary | secondary — Specifies primary or secondary
server configuration. To remove a server, use the address
0.0.0.0.
■ <ipaddress> | <hostname> — Specifies the TACACS+
server.
■ <udp_port> — Optionally specifies the UDP port to be used.
■ client-ip — Specifies the IP address used by the switch to
identify itself when communicating with the TACACS+ server.
config tacacs [primary | secondary]
shared-secret {encrypted} <string>
Configures the shared secret string used to communicate with
the TACACS+ server.
config tacacs-accounting [primary | secondary]
server [<ipaddress> | <hostname>]
{<udp_port>} client-ip <ipaddress>
Configures the TACACS+ accounting server. You can use the
same server for accounting and authentication.
config tacacs-accounting [primary | secondary]
shared-secret {encrypted} <string>
Configures the shared secret string used to communicate with
the TACACS+ accounting server.
disable radius Disables the RADIUS client.
disable radius-accounting Disables RADIUS accounting.
disable snmp access Disables SNMP on the switch. Disabling SNMP access does not
affect the SNMP configuration (for example, community strings).
disable snmp traps Prevents SNMP traps from being sent from the switch. Does not
clear the SNMP trap receivers that have been configured.
disable sntp-client Disables SNTP client functions.
disable tacacs Disables TACACS+.
disable tacacs-accounting Disables TACACS+ accounting.
disable tacacs-authorization Disables CLI command authorization.
Command Description