Recovering the Summit WM Controller’s lost password
Summit WM Maintenance Guide, Software Version 5.3108
2 Reboot the Summit WM Controller. The following menu appears during the reboot process.
3 Select Rescue AC Start-up and then press Enter. The Rescue menu appears.
NOTE
Use the ^ and v keys on your keyboard to select the entries in the above menu.
Rescue AC Start-up Menu. Use with extreme caution.
1) Force System Recovery
2) Create System Backup Image
3) Display Backup Images
4) FTP Menu
5) Network Interface Menu
6) Manually run File System Check Utility (fsck)
7) Restore Backup Image directly from the FTP server
8) Authentication Service Management Menu
9) Reboot
WARNING! - Forcing system recovery will erase all files, and reinstall the image
installed at the factory.
Reboot will restart the system back into Normal mode.
If you have any questions about these options, please contact Support.
Your choice:
4 Type 8. The Authentication Service Management menu appears.
Authentication Service Management Menu
======================================
1) Set Login Mode to Local
2) Reset Accounts and Passwords to Factory Default
3) Change administrator password
4) Return to main menu
Please enter your choice:
To Next Page
Loading...
