Extreme Networks Summit WM - Using the Console Port in the Summit WM100;1000 Controller

Using the Console Port
Summit WM Maintenance Guide, Software Version 5.378
The Summit WM20 Controller is ready to be booted into the Rescue mode.
The following illustration shows the cable connection between a laptop and the Summit WM20
Controller.
Figure 6: Connection between the Summit WM20 Controller and laptop
Using the Console Port in the Summit WM100/1000
Controller
The cable connection between the Summit WM1000 Controller and laptop to access the Rescue mode is
same as described in “Using the Console Port in the Summit WM200/2000 Controller” on page 73.
USB Control
USB Port
USB A Male
USB B Male